Hi Can any body share documentation /procedure to learn scripting( fetching config for specfic details like snmp,ntp from around 1000 routers frm config repository) via VBA tool Thanks
Hi Having 1 query on QosIn between switch-router , we have 1G port & we are plan to do Qos implementation.We are plan to allocate 400M B/w ( exceeding 400M will drop the traffic) for voice traffic in 1G Uplink My query is : Assuming 400M voice path ...
Hi I have very limited knowledge on the same , So I am looking for infoI connected with tier-1 ISP via EBGP, what kind of routing table I will get - default,Entire routing table, partial ?What are they & what are the pros/cons of the same Txsubhojit
Hi I am having 2 no 65xx switch running on VSS setup & 2 no Access switch connected with them ( on both VSS switches via fiber uplink) Access1 try to access 1 server which physically connected only on Core switch 2What Physical path it will follow-a)...
Hi I am having this setup R1--R2--R3 R1-R2 are in Area 2 & R2-R3 are in Area3, Can I communicate in between R1-R3 by any other possible way without adding Area-0
Hi Try thisSwitch# show sdm prefer The current template is "desktop default" template. The selected template optimizes the resources in the switch to support this level of features for 8 routed interfaces and 1024 VLANs. number of unicast mac ad...
Hi Incase I am doing shaping & policing both on same interface- what will be the priority. I think Shaping will come first until the B/w near to full utilized , then Policer do his work Please share some example also for the same