Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone have any indepth experience moving form traditional 10G Waves w/ DCU in the path to a colorless, coherent path that includes 100/200G TXP and and/or 400G T5 Cards w/ OTN Switch. Right now we are running 11.1 ONS Code and sounds like we ne...
Has anyone else used a NCS520 as a CPE / NID and loaded new software remotely? It appears the platform is CPU and/or Rate limited to just shy of 200kbps. At 400+ mbps of code, this takes hours to load. Also when loading code, your monitoring systems ...
Can someone explain to me how the ASR903 platform (specifically running 16.6.2) hashes packets across a LAG that is a member of a bridge domain and how to verify this? I can change the methodology in the running configuration but it seems that it has...
Do you have a valid TX and RX power at either side? both the 9500 and ASR9000? If your QSFPs don't have a valid RX power but are both TX, there is a physical problem. IF there is RX power on both sides, but link is not coming up, have you checked FEC...
Do you want to know the paramaters that CTC sets when building LMPS and then choosing that as an alien wave, or do you want to know about the TXP Card 100G-CK-C?
No, that will not work due to the internal filter in the SFP. You need tohave a BX-U on one end and a BX-D on the other end of the fiber for this towork.
In CTC, goto the card in question.- Click provisioning, then card down below. you will see it configured for OTNXC. High light the configuration, and click ODU Utilization -- please share the results. You may be running into a limitation.
