Hi ,I've got heaps S route in my routing table which are the destination of VPN client.I tried clear ip route a.b.c.d , clear ip route *, this never clear.This cause VPN connection drop out.What should I do? It is headquater route,...
I need to order a CISCO881, only CISCO881-K9 is available.I checked everywhere, still not sure if it is enough for me. We used to buy Sec-K9I've got an adsl modem in bridgemode in the front. As only 1 IP provided by ISP, I need 881 to be able to pass...
The router rebooted this morning with a bus error. Is it hardware failure? Should I worried?Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(2)T1, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyri...
I have a user using windiows 7 64 bit. I tried vpnclient-winx64-msi-5.0.07.0290-k9.exe and vpnclient-winx64-msi-5.0.07.0440-k9.exe. Installation is fine. Connecting is fine. But no traffic goes through.The remote end cisco is 1811 VPN Server split tu...
Could anybody tell me if the following senario will work?2 ASA 5505 work as Active/StandbyPrimary Unit has PPPoE WAN Link, Secondary Unit has Ethernet WAN Link.The purpose is if PPPoE is down, the Second unit will take over and pass the traffic.My qu...
it is cisco 881 with c880data-universalk9-M , version 15.1<2>T1When I clear ip *, it takes ages and slowly from top to bottom. Overnight, it has deleted my real Static route to other sites and not reach any of the VPN user routes.It forced me to reb...
They are showing up as S , but not configured as static router. So no way to no ip route ...They are the VPN client connections. When user VPN in, a route is added. When they disconnect, crypto session is gone, but route stays there. That's the one I...
You mean when I apply for more IPs. These IPs are routed to my router. Router and the asa outside interface has /30 ip for routing. The additional IPs do notneed to be assigned for a public pool like firebox then to be used?
