Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
To perform password recovery on most Cisco devices, you will need console access to it. The same goes with the Cisco ACE Service Modules as well. If the ACE is not local to you or if you cannot establish a console connection for any other reason, and...
Hello Robert,
The N2348TQ-E is a cost optimised version of the N2348TQ, otherwise identical in features. Internally, the -E has a different PHY. No functional differences in the specs (memory, buffers, etc).
Best Regards,
Santhosh
Hello Katerina,
This looks similar to CSCvi80792.
Do you have DCNM / NMS / Script executing commands on these switches? You can try and correlate these kernel logs against the entries in the accouting logs (show accounting log).
It'd be better ...
Hi,
Yes. For PBR, you will need the "Layer 3 Enterprise Services" license.
Please refer to Table 15 of the NX-OS Licensing Guide:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/licensing/guide/b_Cisco_NX-OS_Licensing_Guide/b...
Hello Jeremy,
The expansion module can be installed in the switch without any disruption. The switch and the existing module will continue to operate normally. You just install the GEM, and after power on, you should see the module/interfaces from ...
