Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have completely forgot everything I need to do to integrate a POTS line into our CUCM. I have 2 pots lines that need to be added to our 2921 Voice Gateway. I hope to use slot EHWIC1 that currently has a VIC-2-4FXO module in. port 2 and 3 I wanted t...
Good Afternoon All, I am currently having an issue with some of my hosts when they try to connect to a specific WLAN. This WLAN is static mappings only, which is controlled through the firewall (IP reservation through MAC Address). The Cisco 5504 is ...
Hi All,I am currently having an issue after implementing the latest 8821 firmware 11.0(5)SR3.I have 13x 8821 Wireless phones which after the firmware update, they won't connect to the wireless network. I checked my CUCM version and the AP/AP controll...
Hi All,First post! I am currently running Cisco CUCM 11.x. As I am working on a ship, I require to change the Time Zone now and again of the phones. I have 2 Date/Time Groups, one which has 7 devices, the other 115. When I change the timezone I obvio...
Hi all, I have a WLC with 35 AP configured. In the monitor page of the WLC there is an Access Point Summary Section to show the radios.The 'all APs' section has one more ap than the other radios.Sometimes it will go down to 34 AP's but a page refresh...
Hi Roger,I haven't played with these setups in 8 years and I'm asking for help to find that resource, I've spoken to a few different companies all so called cisco certified partners and NOBODY can answer me or help with the setup saying my gear is so...
Hi Roger, There are 2 analogue lines connected to a outgoing Voip box using sip most likely ( https://www.innomedia.com/mta6328-2re/ ) I can connect an analogue phone to those ports and dial out fine.All I thought about doing is connecting 2 analogu...
