Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a "NFVIS" ENCS-5408 router whose WAN port is connected via /30 address.
Now, this device doesn't seem as intuitive as regular IOS where I set default route for different networks.
How do I set different default-gw so that both mgmt and wan r...
I have 3 ACI APIC UCS appliances.
1 of them is up and can be ssh-ed viva OOB mgmt.
Rest are not, although they can be pinged.
I used https://supportforums.cisco.com/t5/application-centric/how-can-i-make-a-apic-to-a-factory-default/td-p/253221...
Struggling to find/install/activate telemetry on NX. "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/guide/b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Programm...
Trying to enable ssh on ASR-9K via vrf management interface.Doesn't seem as straight forward as regular IOS or NX-OS.Help appreciated.#############RP/0/RSP0/CPU0:asr#show runTue Apr 4 21:54:55.407 UTCBuilding configuration...!! IOS XR Configuration ...
I see that regular IOS & NX-OS & ASR(IOS-XE) have different ways of setting out-of-band management interface.
Below is brief config.
I can ping my immediate default gw but can't ping anything outside of my vlan/subnet.
Help appreciated, thanks!
##...
thank you that did it.now magically everyone discovered each other.
(none) login: admin******************************************************************************** Fabric discovery in progress, show commands are not fully functional Log...
So while it was NX-OS, I was able to use "show lldp" to see APIC(s).
Then I saw the post and booted NX into ACI mode. (as in "boot aci image")
I'll provide update soon.
Thanks for your time.
1# show ver Role Id Name Version ---------- ---------- ------------------------ -------------------- controller 1 crn1 2.2(1n)
also, booting NX into ACI mod...
thanks for the continued help.
watched video and added serial #s of N9K to APIC ACI web-gui interface.
But still not discovering IPs of the N9K(s).
On the N9K(s), however, "show lldp nei" swhos all APIC ACI devices.
Do N9K(s) themselves need ...
