Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Has anyone gotten FAC to work with the UC560? The box only crashing when the voip is enabled. When i shutdown the voip it makes the calls successfully.can help is greatly appreciatedhere is the configurationPlace the files in flash enter_accou...
Hi All,I currenlty have a CME router with SIP phones.I'm trying to create a shared extension between an manager and assistant. However, I'm only getting the assistant phone to ring while the manager phone does not show any incoming calls.Here is how ...
Hi All,I'm currently setting up a CME with SIP (8961) and SCCP (7945) phones. There are two CME one primary and other is secondary.For SCCPFailover to secondary CME is goodRe-registered to primary router is good as wellFor SIP (The Problem)Some SIP p...
Hi All, I currently have a customer that is having some trouble calling a into there Cisco IPT system. When an external users calls into the system e.g.456-1234. Some would reach the operator (which is correct) while others would only keep hearin...
Don't know if you went through this T1 PRI Troubleshooting Flowchart. Worth a try http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a754a.shtml
verify line coding with TELCO is correct"A Path code violation error event is a frame synchronization bit error in the D4 (SF) format, or a CRC error in the ESF format. Path code violations and line code violations are typically present simultaneo...
