Hello Guys, I have Wireless controller setup in netherland and i want to register a access point on it over the internet in INDIA.  Please guide how we can do it with the help of public IP. P.S: there is no WAN connection available ... View more

Logs: ar  3 14:34:27.659 UTC: %SEC-6-IPACCESSLOGNP: list ACL-VTY-Access permitted 0 156.4.226.180 -> 0.0.0.0, 2 packets Mar  3 19:29:32.154 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from EXCHANGE to DOWN, Neighbor Down: Too many retransmissions Mar  3 19:30:32.156 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from DOWN to DOWN, Neighbor Down: Ignore timer expired Mar  3 19:56:08.778 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from EXCHANGE to DOWN, Neighbor Down: Too many retransmissions Mar  3 19:57:08.780 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from DOWN to DOWN, Neighbor Down: Ignore timer expired Mar  3 20:06:55.197 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from EXCHANGE to DOWN, Neighbor Down: Too many retransmissions Mar  3 20:07:55.199 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from DOWN to DOWN, Neighbor Down: Ignore timer expired Mar  3 21:38:30.529 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from LOADING to FULL, Loading Done Mar  3 21:58:45.229 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from EXCHANGE to DOWN, Neighbor Down: Too many retransmissions Mar  3 21:59:45.234 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from DOWN to DOWN, Neighbor Down: Ignore timer expired Mar  3 22:14:46.153 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from EXCHANGE to DOWN, Neighbor Down: Too many retransmissions Mar  3 22:15:46.155 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from DOWN to DOWN, Neighbor Down: Ignore timer expired Mar  3 22:52:28.544 UTC: %SEC-6-IPACCESSLOGNP: list ACL-VTY-Access permitted 0 199.80.48.111 -> 0.0.0.0, 2 packets Mar  3 23:25:23.547 UTC: %OSPF-5-ADJCHG: Process 1, Nbr 193.58.106.1 on GigabitEthernet1/0 from LOADING to FULL, Loading Done un_gbpsun1# sh run int GigabitEthernet1/0 Building configuration... Current configuration : 218 bytes ! interface GigabitEthernet1/0  description link to Port Sunlight Unilever LAN switch CS01 port 2/1  ip address 145.55.4.234 255.255.255.252  ip route-cache flow  ip ospf network point-to-point  negotiation auto end XXXXXXX# on the other end is core switch and MTU is 1500 ... View more

Cisco Phones are getting restarted / rebooting again on again on a cisco switch. its cisco 4500 switch there is no recent changes on switch and CUCM. Logs: Jan 21 03:58:39 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi5/14, port's configured trust state is now operational. *Jan 21 04:46:13 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi2/21, port's configured trust state is now operational. *Jan 26 00:35:24 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on port Gi6/34, operational port trust state is now untrusted. *Jan 26 00:35:52 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi6/34, port's configured trust state is now operational. *Jan 27 03:48:45 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on port Gi5/14, operational port trust state is now untrusted. *Jan 28 00:51:21 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi5/13, port's configured trust state is now operational. *Feb  5 03:33:09 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on port Gi1/14, operational port trust state is now untrusted. *Feb  5 03:33:31 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi1/14, port's configured trust state is now operational. *Feb  9 05:58:46 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on port Gi2/4, operational port trust state is now untrusted. *Feb  9 06:00:21 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi2/4, port's configured trust state is now operational. *Feb  9 06:00:24 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on port Gi2/4, operational port trust state is now untrusted. *Feb  9 06:02:15 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi2/4, port's configured trust state is now operational. *Feb  9 06:03:44 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on port Gi2/4, operational port trust state is now untrusted. *Feb  9 06:04:11 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi2/4, port's configured trust state is now operational. *Feb 18 23:48:46 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on port Gi1/40, operational port trust state is now untrusted. *Feb 18 23:49:01 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi1/40, port's configured trust state is now operational. *Feb 19 08:14:58 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected on port Gi2/21, operational port trust state is now untrusted. *Feb 19 08:14:58 GMT: %SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: cisco-phone detected on port Gi2/21, port's configured trust state is now operational. ull-sw-lehd-GS02#                                                                   sh run int Gi1/18 Building configuration... Current configuration : 314 bytes ! interface GigabitEthernet1/18  description *** Lehd Voice/Data port ***  switchport access vlan 102  switchport mode access  switchport voice vlan 702  qos trust device cisco-phone  qos trust cos  no snmp trap link-status  tx-queue 3    priority high  spanning-tree portfast  spanning-tree bpduguard enable end ull-sw-lehd-GS02#sh ver Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASE-M), Version 12.2(31)SGA8, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Tue 29-Jul-08 12:23 by tinhuang Image text-base: 0x10000000, data-base: 0x114B25F4 ROM: 12.2(31r)SGA1 Dagobah Revision 226, Swamp Revision 34 ull-sw-lehd-GS02 uptime is 27 weeks, 5 days, 36 minutes Uptime for this control processor is 27 weeks, 5 days, 43 minutes System returned to ROM by power-on System image file is "bootflash:cat4500-ipbase-mz.122-31.SGA8.bin" cisco WS-C4507R-E (MPC8245) processor (revision 10) with 262144K bytes of memory. Processor board ID FOX1224G603 MPC8245 CPU at 266Mhz, Supervisor II+ Last reset from PowerUp 2 Virtual Ethernet interfaces 244 Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory. Configuration register is 0x2102 ... View more