Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
We are moving our old UC560 to a house thats only have satellite Internet. Unfortunately, the provider (XPlornet) does not provide access to BridgeMode on their modem router. To avoid Double Nating, i have desactivated WAN port and use the Mode...
Hi,
I have a customer with SMB needs, he rely on remote RDP access. With the old Dlink cheap router, everything was ok.
With the new RV134W, the 3389 port won't open. Do you think it's a security feature?
I have created a Service for port 3389
i ha...
Hi, When i go in CLI and i do this command:Conf Tsip-ua calling-info pstn-to-sip from name set ABCDEFGAfter that command, the Caller ID name of all my phones are the same : ABCDEFG for example.So i do: Write mem or copy running-config startup-confi...
Hi,I would like to know if cbarge function is supported over PSTN trunks. The router is UC540.It's working right now on my SIP Trunk but my client want to switch to PSTN trunks.I would like to know if the cbarge function will still be available and s...
Thanks Dennis for the fast answer. Unfortunately, I don’t have any routing tools possible with the modem. Everything is blocked inside the configuration web interface.
Very strange,
I have rebooted the router and it worked for 1 hour and now it's down again.
Update. I have rebooted the router again and it's seems working.
Thanks
Hi Synergix, I was having the same problem with one of my client UC560. I corrected it using the CLI with Putty. There is a guide on Firewall.CX site how to configurer and test the NTP server. For myself, i used the ntp server pool.ntp.orgHere is the...
