About Vincent Vlk

Vincent Vlk · 01-30-2017

Hello Team, as i learned from this document: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/release/notes/70351_nxos_rn.pdf#%5B%7B%22num%22%3A49%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C48%2C378%2C0%5D Q-in-VNI ...

Vincent Vlk · 04-04-2016

Hello Team, we have created a simple test-bed VPLS topology to test MPLS/VPLS switching on Huawei P-router + 3x Cisco PE-routers. The topology and configuration is as following. The VPLS seems to be signaled correctly, but NO TRAFFIC is FORWARDED ACR...

Vincent Vlk · 06-08-2015

EDIT: Hello guys, what a stupid mistake from me! I've forgot that i have applied some basic security configuration, which included command to drop all IP packets with Options field set: ip options drop Because IGMP Membership Report packets use R...

Vincent Vlk · 02-15-2015

Hello Everybody! According to: http://x.co/7VKyv When I try to create a VLAN based VPLS VFI instance on the Cat6509-E Sup-2T Switch the command: SW(config)#l2 vfi <NAME> manual is missing: SW(config)#l2 ? router-id Configure a layer ...

Vincent Vlk · 04-11-2016

Hello Vinit, sorry for the delay, i was redirected to other tasks. We interchanged the uplinks from Standby SUP to Active SUP but the behavior is the same, all signaling is OK, but still no data-plane forwarding. So We are going to switchover the SU...

Vincent Vlk · 04-08-2016

Hello, Yes, it is a typo, thank you very much for spotting it. It is now corrected. Vincent

Vincent Vlk · 04-07-2016

Hello Vinit, thank You very much for your interest. Now the configuration is very similar to the config posted above, basically without the C7604 acting as PE router. Topology: [HOST1]--Gi5/2--[C6509E-1]--Gi6/1----Gi6/3--[C6509E-2]--Gi5/1--[HOST2] ...

Vincent Vlk · 04-07-2016

Well, this is strange. Today we tested direct interconnection with Sup2T interfaces between those 6509Es, but still no traffic passes the L3-routed interconnection with VPLS :-/

Vincent Vlk · 04-06-2016

Hello, thank You for reply. Yes, we already tested direct EoMPLS between Sup2T 6509Es, and the result was the same, signaling state is OK, but data-plane traffic is not working at all. BR, Vincent Vlk

Member Since	‎01-15-2014 01:25 AM
Date Last Visited	‎10-09-2017 02:18 PM
Posts	12

User Statistics

User Activity

Nexus 9236c Q-in-VNI (Dot1Q tunnels in VXLAN) support

Multipoint VPLS Not forwarding traffic between PE routers.

[SOLVED] Cisco 6509-E Not Processing IGMP Membership Reports on SVI :: System Version:DUAL-Sup720-12.2(33)SXJ6

VPLS Support on Cat6509-E Sup-2T

Hello Vinit,

Hello,

Hello Vinit,

Well,

Hello,