Has anyone experienced this kind of error message from Cisco 5520 Wireless Controller regarding AP issues with Aironet. Access point radio [AP Name]:1 associated to Cisco wireless controller [Controller Name] is not performing adequately against its ...
We now seem to be having incoming calls issues as I have mentioned to you last week. It seems that CM appears to be answering with 404 Not found from 10.0.4.126 and then CUBE tries again towards 10.0.11.11 which is rejected also with a 404 Not found ...
Greetings, I was hoping if someone here could help me with some configuration information on how I can pass through traffic for our DMVPN traffic through our Palo Alto P3020 firewall. Cheers, Orlando Ramos
Greetings, I would just like to confirm if HSRP would work with DMVPN on two 4351 acting as the Hub with two external ISP gateways on each acting as the Primary and secondary internet connection for failover situations. Cheers, Orlando
Hi Shakkir, Thank you for the advise it really help. I managed to resolved the issue by setting the "Significant digit" to "All". and discarding the old config. Cheers, Orlando
We were able to acquire a class c subnet from ARIN that we can now use for both our 2 different providers. Here is our current router config: !interface GigabitEthernet0/0/0 description Primary ISP ip address AAA.BBB.CCC.133 255.255.255.0 no ip redir...
We are also experiencing the same issues with our DMVPN... at the moment I have a test router as a spoke connected to our hub. The Bandwidth loss from 100M to 30M.
