Hello Team,
Currently in our DC we have 5108 Chassis installed with B200 M4 servers and we have some some slots left in chassis.
As we know that B200 M4 is EOS and we running out of computing resource so it utilize the free slots, we are consider...
Hello All,
We have recently installed expressway C in our network but not able to access it via GUI or SSH.
Suspecting issue with installation we have done re-installation as well.
Any suggestions or support ?
Regards,
Balram
Hello,There is no specific filed in CDR to isolate off-net or on-net call but looking orig and dest device we can get if it is on-net or off-netRegards,Balram
Hello Mr. Austin,Thank you quick response.We are running UCS-EZ8-B200M4-V and it shows EOS under below announcement https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/eos-eol-notice-c51-735597.htmlC...
Hello,Everything looks ok at your side.
Please work with provider and get this issue fixed nothing can be done from your side.
They are not able to route the call due to some unknown reason and sending "404 Not Found".
Regards,
Balram
Hello,
Get below debugs for failed call.
debug voip ccapi inout
debug ccsip message
debug voip translation
Make sure you enable all 3 debugs and make test call to collect the logs.
share running config from the CUBE along with debugs requested.
...
Hello,Looks like you are sending incorrect calling or called number to provider.INVITE Received from CUCM:Received:INVITE sip:0917775245@172.29.8.146:5060 SIP/2.0Via: SIP/2.0/TCP 172.29.8.46:5060;branch=z9hG4bKa5213e80a597From: "Timoteo Test" <sip:95...