Here is the situation...SiteA has a ASA with 3 LANs.SiteB has a PIX with 1 LANs.Every morning, SiteB's LAN can connect to all except 1 LAN (called as server_LAN) on the SiteA. ('sh crypto isakmp sa' shows the tunnel is build but 'sh crypto ipsec sa...

I have a SiteA and SiteB. Both sites have T1 to the Internet. There is a ASA on both ends setting up the IPSec tunnel in between. SiteA has 2950 switch and Site B has 3560 switch. SiteA has a survillance camera and a server that stores the vide...

First time configuring Cisco AP. I have a 1130AG. I configured 2 VLANs (according to Doc ID 69773) and setup IP address on bvi1 port. I can get on a web portal using a cross-over cable connecting a laptop to the AP. However, when I configure ...

Can a 2955 switch work without doing any configuration first?In another words, can I just plug 2955 switch in and power it on and it would start working (switching)?appreciate the help,Douglas

Hi all, Our company is looking to add a VPN solution to our existing network. This is my first time designing a VPN solution and I am asking for some input. Currently, we have hub-spoke FR network goes to the corporate office. 10 FR circuits go to...