Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I need to allocate ip addresses to clients connected to different VRFs. I have allocated the DHCP pool to respective VRF but no success. Can somebody let me know if I am missing somethingip vrf green rd 1:1!ip vrf blue rd 1:2ip dhcp pool green ...
I have 2 * 2600 routers with 2FXO/2FXS cards. I have connected the FXO port on first router with FXS port on the 2nd router back to back. On each of the router, I have a Analog Phone connected. My requirement is I need to dial from phone on 1st r...
I have a non cisco switch, on which I am mirroring the traffic from port 24 to port 23. Port 24 is the source and port 23 is the destination. I have checked by connecting sniffer to this port and it is working fine. Now starts the funny part. One...
It is irony that Pix, although a firewall, cannot block Kaaza or any other application which needs to be blocked on application level. But it can be blocked on Router using NBAR. It doesnt make any sense that although Pix is a firewall, it cannot d...
Since we now have inline IPS box which is going to sit between your outside network and inside network and going to analyze traffic before it reaches the host on either end. Now if you have firewall box, even that's going to analyze the traffic and ...
Hi ScottThis is an interesting info. So you mean to say conn limit is not enforced. So why in the datasheets they mention all this comparison between the different models. So can I say model 501 will support connections much more than what is ment...
The non cisco switch is connected to port 4/1 of the 6500. So Cisco 6500 port 4/1 is the source port and 4/2 is the sniffer port, which will be the destination port. You mentioned not to make a source port. How will that work.
