Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I'm replacing an existing network of autonomous APs with Cisco Mobility Express (v 8.7) using 2802i APs. We use a total of 3 BSSIDs on this network. For business reasons, we want certain APs to only include a single WLAN BSSID.
Via the Mobi...
Hi,
I'm in the process of converting our class C network to a Class A network to allow more client devices to connect to the internet. Because I have limited time to actually work on the routers and switches, I'm looking to see if I can put togeth...
I have temporary network configured in a remote location.
The local facility was supposed to provide us with single, public static IP address from their ISP. It was to have been configured so there was no traffic from any of their adjoining networks...
With the departure of the 1600 series AP's, I'm looking at other AP's to buy in their place.
The 2700 series seems the next best step.
One thing that confuses me is Controller vs. Autonomous.
Can all 2700 series AP's be set to boot and use Autonomous...
Hi,
Have a 2951 router connected to 2 200-26p switches.
The ISP comes in via Fibre on interface 0/1. 0/0 & 0/2 are connected to each switch.
The router uses a public Static IP provided by the ISP.
Need to add a new 2951 router to this configuration ...
Ah...let me make this clearer. Here's my usual configuration:
ISP Service - with Single Static IP address for our use
incoming service at point of entry in facility to:
ISP provided non-routing cable modem/bridge
ethernet connection to:...
When I say manage by console, I mean it's not worth it for us yet to change our current SAP wifi units (which are managed individually) to CAP wifi units (which are managed through a cisco wireless console)
