About fdharmawan

fdharmawan · 08-12-2024

Hi Guys,So I am currently in the start of access point migration from Cisco to Meraki. My current deployment is:5520 WLC running on 8.10.162.03802 as client serving APs2802 as WIPS APs with MSELet's say the SSID that being broadcasted on my environme...

fdharmawan · 05-07-2024

Hi Guys,Is there any procedure on how to change ISE IP address? We just migrated the DNS server and need to update the settings on the ISE.What I know so far is that I suppose to change it via CLI. Our current setting is "ip name-server 192.168.0.10 ...

fdharmawan · 04-07-2024

Hi Guys,I want to review the alerts that has been generated by Cisco PI, especially the one generated from custom monitoring policy. I have been looking into the system but so far got nothing. The details that I want to have is the severity of the al...

RF Profile vs Global Configuration · 03-20-2024

Hi Guys,I want to enable client threshold traps, so if exceeds a certain amount of client that is being handled by the AP, PI will send an alert stating that the AP might be overload. On the WLC, I found the setting on RF profile, but could not find ...

fdharmawan · 01-02-2024

Hi Guys,Currently I am doing a wireless review. Some of the aspects being reviewed are AP tx power and clients connected to the AP on each radio. I am able to get the tx power on each radio by issuing "show advanced 802.11a/b txpower" command. But I ...

fdharmawan · 08-13-2024

Okay, thank you Marce. Since we have WIPS, hopefully it doesn't start to disrupt the existing. Because as far as I understand from the document, it only creates an alert for the rogue WLAN.I have syslog server setup in place, we use Splunk. So I will...

fdharmawan · 08-13-2024

Well, for the first phase of the pilot, we will use the different name. But for the second phase, we will use the same SSID name as our purpose is that it will be seamless for the users. But this second phase pilot is kind of separated from the other...

fdharmawan · 08-12-2024

At the first place, we will create a dummy SSID. The first pilot will be on IT room, and the second pilot will be on the whole floor before deploying it to other floors. My concern is when the 2nd pilot phase. From wireless perspective, I'm less conc...

fdharmawan · 04-08-2024

Hi Balaji,I configured custom monitoring policies for access points. The PI version is 3.7.I have checked on the Monitor > Monitoring Tools > Alarms and Events menu. I can see other events triggered for the access points, but not my custom monitoring...

fdharmawan · 01-02-2024

Hi Marce,I finally using the "show client summary" then tweak the output on Excel to get what I want. Thank you for the insight. Maybe Cisco does not provide it.

Member Since	‎10-08-2017 07:59 PM
Date Last Visited	‎08-11-2024 08:28 PM
Posts	356
Total Helpful Votes Received	107

User Statistics

User Activity

Rogue WLAN Detection on Wired LAN

Change ISE DNS IP

See Alert Summary on Prime Infrastructure

RF Profile vs Global Configuration

List Number of Client AP Handles on Each Radio

Re: Rogue WLAN Detection on Wired LAN

Re: Rogue WLAN Detection on Wired LAN

Re: Rogue WLAN Detection on Wired LAN

Re: See Alert Summary on Prime Infrastructure

Re: List Number of Client AP Handles on Each Radio