Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When surveying with Airmagnet Survey, I've noticed my interference levels are extremely high when doing a passive survey, and very low during an active survey. I can assume this is because the card can only listen on the associated channel during an ...
Does anyone know of a software platform that can help us enforce the network adapter settings of our wireless clients? Unfortunately we don't have a lot of control over the chipsets and device types. If we could identify clients that do not meet our ...
What kind of hardware are people using for mobile bridges? I have not had good luck with Cisco 1242's in bridge mode with mobile-client enabled. The only reason we're using the Cisco access point over standard industrial bridges is because we need to...
My company deploys are large number of devices so we generate all our switch configuration files with scripts. Is it possible to have the VTP commands as part of our configs? I've been testing this and receiving the error "%The VTP Password cannot be...
Is there a way for groups to inherit credentials instead of manually updating them each time a new device is added? I know how to apply credentials to a group of devices, that works just fine. I work on a large network where devices are added weekly ...
I got this working on my 2106 controller after talking to buddy at Googlehttp://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtmlChange the AP mode from local to H-REAP/Flexconnect and then enable local swi...
I'm pretty sure the survey data is accurate. If you tune the settings on the active survey, the client roams just fine. We set ours to scan at -65 dbm for our higher density installs and the roaming points are very predictable. As long as the airwave...
Some screen shots to show the differenceActivePassiveThe red, blue, and green dots are the access points. The color refernces the level. The surveyed area is about 1200' long. So far client performance has been outstanding, its just the extreme diffe...
Just to follow up. Since most of our clients run Cisco cards, we've decided to start by locking down access to the profiles so users and computer techs cannot make changes. We're also exploring the idea of using Cisco AnyConnect as a common interface...
I'm looking at an array of device types. Handheld scanners, zebra label printers, Windows XP forklift terminals, DOS terminals. If we could get the Windows based clients under control, it would be a big step. I've looked at NAC for other reasons in t...
