Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I was recently assisting a customer with a problem that I've seen on and off over the last year or so, with the Cisco Webex client.Intermittently, when the customer was joining the meetings - when connecting the PC audio (using for example, th...
Hi everyone!I have a Cisco 2800 router running version 12.4(16b) of the IPVOICEK9-M IOS (sh ver below):Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4(16b), RELEASE SOFTWARE (fc3)and am continually experiencing the following SIP...
Hi Rafiz,In the device settings, either per device, or per location (this setting cannot be changed at Org level).Make sure to apply and reboot any devices, to pick the changes up.RegardsScott
No - can be done at Org or phone level, but has to be done by TAC (no customer access).You can download the PRT logs, and check the XML file to see if the setting is set (on or off - default is off).Admin access to the phone web GUIs can also be prov...
Hi,I have been dealing with this exact problem with a customer (and TAC) for some time - and finally have made some progress.Issue looks to be caused by voice packets not starting to stream until the ACK follows the 200OK, in call establishment (has ...
https://binaries.webex.com/WebexDesktop-Win-64-Gold/20240806162643/Webex.msiBe aware that this version introduces the allowance of an 'xcodec' codec (based on Cisco controlled tenant toggle), which can break outbound calling for some customers (depen...
