Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,One of the client im working on has requested me to change the inititator from site A to site B. Currently, Site A is the initiator and Site B is the responder. The reason is the client could not access any sub-client site from Site A. In ca...
Hi guys out there,I have some confusion about the realtionship over here. For example, for a site we have 4 APs connected to one switch. The WLC is also connected to the same switch. Physically, the APs has seperate connection to each port. So , does...
I have configured a spanning tree root for vlan 999 named NULL and it is only having one port assigned to it. The port is shutdown. However, when i configured the spanning tree root with thepriority for this vlan, it is not showing under the "sh span...
Try the below and see whether that worksThe inside interface of the PIX cannot be pinged from the other end of the tunnel unless the management-access command is configured in the global configuration mode.PIX-02(config)#management-access inside
PIX...
Giuseppe,Thanks for your remark. Yes, i was thinking about what you wuld have said but i tried enabling the port and yet i did not see any changes to te STP summary output. Does it take sometime to be shown as STP process takes a while right? Since t...
