Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!We have an as5300 with 120 channels of DSP (C549) with IOS c5300-ik8s-mz.123-15.At about 80-90 calls (VoIP->PSTN, h.323, g729r8) the CPU load rises to 99-100% and calls are failing.We limited the number of calls for 70 and it goes well now, how...
Hello!I read some documents about the mentioned routers, but it's not clear what are the main differencies in the question of VoIP/FoIP performance. I know, that 5400 series has 16E1 capacity counter to 5350 which may have up to 8E1s.I also know that...
Hello!I have configured NTP on a Cisco AS5300. PRI's have clock source line configured and it works well (no slips). I would like to provide this precise time (gotten from PSTN) to PC-based servers with NTP. My question is:how to tell the cisco route...
Dear All,I would like to ask whether it is possible to send a fax call to a fax machine which sits on a separated extension behind a PBX. What I mean:call comes into the PBX, PBX picks up the call, sender fax machine sends the extension number with D...
Hello!I tryed to send fax with T.38 through an as5300 gateway - IOS 12.2(5). The called fax equipment was a Panasonic KX-TM131 fax machine. I wasn't able to send fax - I tryed many-many times.In Cisco I got:2w0d: 0:D (20085) 37979490 fr-msg-det NSF2...
I checked call spikes/threshold/etc. commands already.What is as5300 intended for than? I hear many voices that it is able to handle 120 calls.The soulution would be to ask the terminating party to not send more than 2 cps?Would an as5400 solve such ...
Hello Teodor!That's a nice idea. However that would introduce many problems. Not easy to put any box before the gateway, another single point of failure, delay source, etc.I like the idea behind 'call spikes' command. Right I'm going to try it.If it ...
Hmm, you can be right! Isn't the call spikes feature for solving such problems?I have:call spike 10 steps 10 size 100But maybe I sould try:call spike 2 steps 10 size 100 according your 2cps limit. Do you think it can help?Regards, Tamas
Do you know if this improved performance on 5400HPX gives better processing of faxes or higher number of concurrent faxes?For what kind of operation is HPX version better/recommened against 5400 or 5350?
Hello!You have to find the channel the call is hanged on. You can make it with 'show voice call status' or with calltracker (1st you have to enable it and use something like: show call calltracker active | include calling). If you found the channel, ...
