Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have a WLC4402 with WLAN SSID Guest open authentication set to WebpolicyAttached is the config, I have a lobbyadmin username that create users, my guest users are able to get IP but when they fireup their IE or Mozilla browsers, the cant get any...
Hi I have a WLC4402 with WLAN SSID Guest open authentication set to WebpolicyAttached is the config, I have a lobbyadmin username that create users, my guest users are able to get IP but when they fireup their IE or Mozilla browsers, the cant get any...
Hi,Anyone can help me to get the link for the ASA Active/Actice config example?I only see in CCO the Active/Standy Example with config and network diagram notes.Appreciate if anyone can send me a link.Many thanks, the config guides for ADSM 5.2. and ...
Hi anybody can help? my cisco ip communicator has no Rcvr Packets hence producing one way audio, My set-up is CME 3.3 IP Communicator 2.0, my IP communicator is connected to the Head End device using VPN client 4.0.5D, attached is the statistics
Hi, I got a problem with my IP communicator , im trying to make it work via IPSec VPN using Cisco VPN Client 4.05.D, I noticed during the debug that I can't received any packets for audio, any idea whats the show stopper? attached is the statistics, ...
hi if you are having issues in the vlan taggingmake sure that you have in your switch port that is connected to the WLC as trunk and that switch have the global config in your catalyst switchvlan dot1q tag native try that
hi use the same network for your wlan infrastructureyour ap manager ip and management ip should be in the same VLAN network, also set up a scope in your DHCP server in the same VLAN for the LWAPP
Hi Whiteford, r u using ASDM, somewhere somehow the authentication will fail if you are using the Test button key , make sureyou add the domain with the username when you are testingusername@domainpasswordgive it a try of DOMAIN\userpassword
Do you have NAT enabled on your router? If yes, make sure you have a rule not to NAT traffic from Lan to LAN bet two sites.If you have a rule, make sure you dont use the same access-list, make a new one for your nAT exemption
Hi Joe, Before you post the config, make sure that you have an access-list that prevents the Natting of Source traffic from one building to another building.You need to excempt this traffic in order for LAN to LAN communication to work. Though you ca...
