Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My LAN has a 128KBPS connetion to Internet. I need to separate them become two (LAN A and LAN B).Each LAN with 64KBPS Internet connection.Is there any kind of equipment (switch) to meet the requirement?Any comment or suggestion will be highly appreci...
Dear Sir or Madame,2 LAN of mine need to be connected. The distance should be less than 1 km (0.6 mile). I have plan to do bridging (IP Based) between them. Do Cisco provide any product that can do WIRELESS UNLICENSED 2.4GHz BRIDGING for outdoor inst...
Dear Sir or Madam,We have this requirement: +---------+Dial-up1-PSTN--| |-Etht / Dial-up2-PSTN--| Dial-up | to LANDial-up3-PSTN--| RAS / | |Dial-up4-PSTN--| Router | LAN Public Internet. | | | ...
Dear Sir / Madam,My objective is only to enable my Cisco 1601-R router as NAT so I can use private IP for some of my computers in my LAN to connect to internet.What command sould I add to the configuration?Thank you in advance for any help or comment...
I tried this config, and it's work pretty well.interface Ethernet0 description Local Area Network ip address 192.168.0.1 255.255.255.0 secondaryip address xxx.xxx.38.33 255.255.255.240 ip nat insideno ip directed-broadcast no ip route-cache ! interfa...
FYI:All IPs as stated at the configuratioan above are Public IPs.Current status: Only 13 PCs having public IP address from xxx.xxx.38.34 to xxx.xxx.38.46 are able to go to Internet (gateway: xxx.xxx.38.33).Status Required:1. Those 13 PCs above are st...
Hi Georg,I really appreciate your prompt respons.But please let me have another chance.After adding those lines marked "-->" those PCs assigned public IP (xxx.xxx.38.34~46) still able to go to internet. Then, the question is, what are the private IPs...
