Wireless LAN Bridging

[xkepo]

Dear Sir or Madame,

2 LAN of mine need to be connected. The distance should be less than 1 km (0.6 mile). I have plan to do bridging (IP Based) between them. Do Cisco provide any product that can do WIRELESS UNLICENSED 2.4GHz BRIDGING for outdoor installation with RJ-45 port? If yes, could you please to point me to any site providing more information on the products?

Any comment or advise will be highly appreciated. Thank you in advance.

Regards

Alex

[xkepo]

In addition, do any point to multi-point bridge / router with bandwidth limitizer such as 19.2KBPS, 32KBPS, 64KBPS and so on?

[m.scheirer]

You can use Linksys Wireless Bridge WET11 - 11Mbps, http://www.linksys.com/products/product.asp?prid=602&scid=36 and see: http://www.cisco.com/en/US/products/hw/wireless/ps458/products_installation_guide_chapter09186a008007f74e.html#xtocid4 for bridges, and the following link for antenas: http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008022b11b.html

Best regards, Miki Scheirer