why? I have always used Prime and its been ok apart from this occasion when there is no space in flash. ... View more

hi i posted the dir flash-1 and 2 above thanks. ... View more

i just did a software clean file flash-2: and deleted the .bin file but still Prime says insufficient free space on flash-2. I suspect it will not upgrade via this method. ... View more

hi, sorry for the late reply had a bit of a disaster with 1x of the switches. they are back to the state they were earlier. here is an extract of the flash-1 and flash-2:   flash-1: Directory of flash:/ 69698  drwx        4096  Jul 23 2018 10:28:12 +00:00  .installer 69699  drwx        4096  Jul 12 2019 08:59:46 +00:00  dc_profile_dir 69701  -rw-     2097152  Jul 12 2019 09:00:28 +00:00  nvram_config 69725  -rw-           0   Jul 2 2019 09:37:51 +00:00  .onreboot 69703  -rw-          35  Jun 19 2019 13:52:39 +00:00  pnp-tech-time 69704  -rw-       57813  Jun 19 2019 13:52:42 +00:00  pnp-tech-discovery-summary 69708  -rw-          76   Jul 2 2019 09:08:21 +00:00  boothelper.log 69709  -rw-         556  Jul 12 2019 09:00:19 +00:00  vlan.dat 69712  -rw-       65568   Jul 2 2019 09:08:37 +00:00  memleak.tcl 69710  drwx        4096   Mar 6 2019 09:59:50 +00:00  core 77441  drwx        4096   Mar 6 2019 09:52:25 +00:00  .prst_sync  7747  -rw-    83298720   Jul 9 2019 09:19:03 +00:00  cat3k_caa-base.SPA.03.06.08E.pkg  7748  -rw-     3949504   Jul 9 2019 09:19:03 +00:00  cat3k_caa-drivers.SPA.03.06.08E.pkg  7749  -rw-    33811696   Jul 9 2019 09:19:03 +00:00  cat3k_caa-infra.SPA.03.06.08E.pkg 69718  -rw-        1237   Jul 9 2019 10:25:35 +00:00  packages.conf 69707  -rw-         444   Jul 2 2019 09:08:06 +00:00  bootloader_evt_handle.log 92929  drwx        4096   Mar 6 2019 09:52:27 +00:00  .rollback_timer 69711  drwx        4096   Mar 6 2019 09:52:35 +00:00  gs_script 69714  -rw-     2097152   Jul 2 2019 09:38:20 +00:00  nvram_config_bkup  7750  -rw-    43109956   Jul 9 2019 09:19:04 +00:00  cat3k_caa-iosd-universalk9.SPA.152-2.E8.pkg  7751  -rw-    28447888   Jul 9 2019 09:19:04 +00:00  cat3k_caa-platform.SPA.03.06.08E.pkg  7752  -rw-   112669764   Jul 9 2019 09:19:04 +00:00  cat3k_caa-wcm.SPA.10.2.180.0.pkg 1621966848 bytes total (1308893184 bytes free)   flash-2: Directory of flash-2:/ 40414  -rw-         556  Jul 12 2019 09:03:58 +00:00  vlan.dat 40403  drwx        4096   Nov 2 2018 12:07:35 +00:00  .installer 40415  -rw-     2097152  Jul 12 2019 09:03:58 +00:00  nvram_config 40405  -rw-     2097152   Jul 2 2019 09:38:13 +00:00  nvram_config_bkup 40406  -rw-        1073   Jul 2 2019 09:09:17 +00:00  bootloader_evt_handle.log 40407  drwx        4096   Jul 2 2019 08:12:54 +00:00  core 80801  drwx        4096   Jul 2 2019 08:27:46 +00:00  .prst_sync    11  drwx        4096   Nov 2 2018 12:18:18 +00:00  .rollback_timer  8083  drwx        4096  Jul 12 2019 09:03:03 +00:00  dc_profile_dir  8085  drwx        4096   Nov 2 2018 12:18:27 +00:00  gs_script 40402  -rw-          76   Jul 2 2019 09:09:32 +00:00  boothelper.log 40409  -rw-       65568   Jul 2 2019 09:09:48 +00:00  memleak.tcl 72722  -rw-        1237  Jul 11 2019 14:39:09 +00:00  packages.conf 40421  -rw-           0   Jul 2 2019 09:37:44 +00:00  .onreboot 40404  -rw-   305292424  Jul 11 2019 11:04:41 +00:00  cat3k_caa-universalk9.SPA.03.06.08.E.152-2.E8.bin 72726  -rw-    33811696  Jul 11 2019 14:13:50 +00:00  cat3k_caa-infra.SPA.03.06.08E.pkg 40424  -rw-    83298720   Jul 9 2019 09:19:05 +00:00  cat3k_caa-base.SPA.03.06.08E.pkg 40425  -rw-     3949504   Jul 9 2019 09:19:05 +00:00  cat3k_caa-drivers.SPA.03.06.08E.pkg 40408  drwx        4096   Jul 2 2019 09:01:26 +00:00  onep 72727  -rw-    43109956  Jul 11 2019 14:13:59 +00:00  cat3k_caa-iosd-universalk9.SPA.152-2.E8.pkg 72728  -rw-    28447888  Jul 11 2019 14:13:53 +00:00  cat3k_caa-platform.SPA.03.06.08E.pkg 72729  -rw-   112669764  Jul 11 2019 14:14:13 +00:00  cat3k_caa-wcm.SPA.10.2.180.0.pkg 1562902528 bytes total (687865856 bytes free)     ... View more

i'm not able to assign the access list like you have here:   snmp-server host 172.20.14.215 version 3 priv TESTUSER access 5   there is no option access ? ... View more

ive seen this example here: Router(config)#access-list 99 permit 172.25.1.0 0.0.0.255 Router(config)#access-list 99 permit host 10.1.1.1        Router(config)#access-list 99 deny any  Router(config)#snmp-server group COOKRO v1 access 99 Router(config)#snmp-server user TESTRO1 COOKRO v1    Router(config)#end   do I take it that the IP 172.25.1.0 0.0.0.255 is the IP address of my switch (in this example)? and the permit permit host 10.1.1.1 (in this example) is the IP of my Prime box?  also what does this bit do: access-list 99 deny any  ?     ... View more

I had used the following commands originally: snmp-server group <name of snmp group> v3 priv snmp-server user <username> <snmp group> v3 auth sha <AUTH_PASSWORD> priv aes 128 <PRIVACY_PASSWORD>   Then I thought this command would restrict but perhaps i'm wrong then: snmp-server host <ip address of my prime box> version 3 auth <username>   So are you saying I could do away with this command snmp-server host <ip address of my prime box> version 3 auth <username> and perhaps use an ACL? Thanks for your help.   ... View more

What model WLC is it ? and what version of firmware does it have ? This was some time back for me but I remember it was affecting our anchor controller. We ended up upgrading the firmware which resolved the problem. ... View more

Hi Leo Laohoo, are you able to confirm if I click deploy it will allow to select specific controllers to push the template out to ? ... View more

So by selecting that I get: #MODE_ENABLE write memory #INTERACTIVE reload <IQ>configuration<R>no<IQ>Proceed<R>yes <timeout>${waittimeout}</timeout> #ENDS_INTERACTIVE #MODE_END_ENABLE Does this apply to a 2504 WLC ? or do I have to amend this to something like: reset system at Also, slightly confusing, I haven't clicked it yet but there is a 'Deploy' button, do I assume after I click that I can select a specific wireless controller to push this out to - I was concerned it might push a reboot out to all WLC's if I clicked 'Deploy'. ... View more

ok I suppose what i'm asking is there a quick way to bulk export the running configs in prime to another location ? I can only seem manual export of running config for individual switches. ... View more