Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We've been running PRI's on 6608 blades for years. Last month, we upgraded from CCM 4.2 to UCM 7.1 Since then, we get regular 6608 port resets (like every night at 6PM) on several different blades at the same time.All ports on all cards are defined (...
We have a 150MB TLS type circuit between our 2 main sites, connected to GB fiber ports on each end via Cat6509. File copies between servers with GB LAN connections 1 direction are fast (3 seconds for a 20MB file) but can take as long as 90 seconds th...
I've run into a strange problem. 3560 switch, connected to a 7940 phone, port config as shown below.I can connect some PC's (Windows 2000 and XP) to the phone and the config works as advertised (phone gets the voice vlan and the PC gets the data vlan...
I have a PIX 525 on each end of a T3 connection. Every few days, I can see in the syslog (and experience it when it occurs during workday) the following:%PIX-6-602302: deleting SA, (sa) sa_dest= x.x.x.x, sa_prot= 50, sa_spi= 0xb9f82428(3120047144), s...
I have both the Linksys WET54G and WUSB54G. Both can connect no problem to the Aironet 1200 w/o WEP.Enable WEP, and neither will work. Am I wasting my time trying to get it to work? If so, what is the best alternative for a Wireless 802.11g workgroup...
These mesage appear on only 1 of the PIX's. The other never seems to drop the VPN, so I don't know if renegotiation is occuring.It happens several times a day and corrects itself, usually within 5-15 minutes.Link is not oversubscribed. It is a full T...
Think I got it working.On the Aironet 1200, the encryption setting needs to be Cipher with WEP-128 bit. The standard WEP -128 bit will not work, but the Cipher WEP-128 will.It's worth some more research to figure out why, but that can wait.
