About hjmacholl

hjmacholl · 02-04-2006

Hallo Profs,I have to upgrade some 2500, 2600 and 3600 routers in a Lab environment with new flash memory. Every router can get the image over the net from a TFTP server, but not in all configuration situations. All routers are two-bank-SIMM-based an...

hjmacholl · 02-07-2006

This case is settled. The problem is to use a direct connection between the router and the XMODEM partner device and not a reverse Telnet connection.

hjmacholl · 02-05-2006

The crucial issue is: How to get a new image (over TFTP, XMODEM, whatever) to a BLANK !!! internal flash?

hjmacholl · 01-12-2006

Hallo johansens,your explanation was very understandable to me. Thank you for help!hjmacholl

hjmacholl · 01-11-2006

Sorry fellows,what about this full-range access-list:access-list 100 deny ip 10.246.32.230 0.0.0.15 any ?Thank you for consideration.hjmacholl

hjmacholl · 08-05-2005

Hi,to solve the problem I would suggest the following procedure:1. Exchange the roles of the routers by exchanging the cable ends.2. Use the "no clock rate 64000" command on the existing (up to now) DCE router and the "clock rate 64000" on the new D...

Member Since	‎05-02-2004 02:51 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	7

User Statistics

User Activity

Upgrading a router with flash memory

Re: Upgrading a router with flash memory

Re: Upgrading a router with flash memory

Re: Deny 15 IP's with ACL

Re: Deny 15 IP's with ACL

Re: "clock rate" command