Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know how to set up a qos policy that can classify based on whether an incoming frame is 802.1q (single tagged) or 802.1ad (double tagged) on an ME3400E?
I have a unicast IP flow (no L2 or L3 multicast or broadcast) running between a source device connected to an "access" port in vlan 21 and a destination device connected to an "access" port in vlan 1. Routing between the vlans happens on an external ...
We are running a ping test and the pings are failing. When we "debug ip packet" we see packets from this "255.1.164.106" address that appear to be answering the ping that is failing. Has anyone seen this before ? Where could these packets be coming f...
I am seeing input queue drops as follows...Input queue: 0/2000/645675/0 (size/max/drops/flushes)The drops counter is slowly incrementing but the size counter is always zero. Why are packets being dropped when the queue is empty. I thought the size co...
Thanks a lot for your suggestion.I have played around with this feature and unfortunately it looks like the ingress interface has to be configured as a dot1q tunnel in order for the match inner vlan option to work. We want the interface to be a plain...
No one is running DECNet as far as I know. We certainly do not have any DECNet commands configured anywhere on the router. I wonder why there is not a command of the sort "no service decnet" ?
Thanks GP.I understand what you're saying but I have entered the command hundreds of times as fast as I can and the size is always zero even though the drops are incrementing.Also we have not entered a "hold queue" command to change the buffer size, ...
Thanks for the reply.FYII tried some more and found this:xxxxxxxxxxxxxx#sh bootBOOT variable = sup-bootflash:s72033-pk9sv-mz.122-18.SXD.bin,1CONFIG_FILE variable does not existBOOTLDR variable =Configuration register is 0x2102Standby is upStandby has...
