Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I just stablished an IPsec VPN with one of our prividers, the VPN get's stablished but one of the IPs in my lan is in conflict with a device in my providers side. I'm trying to configure NAT to avoid the conflict but I'm clueless on the steps to do i...
Hi guys, I have 2 internet connections that will be providing services to different servers, the idea is that both connections can work at the same time, I will be sending some traffic through WAN1 and a different independent traffic through WAN2 all...
Julio:Thanks for the help, the VPN is working now. Only one thing I have to add, at the beginning, it took me a while to make it work until I found there was a NAT exception rule that overrule the static command, once I removed the excpetion everythi...
Amit, below is the output you requested Routing entry for 0.0.0.0/0, supernet Known via "static", distance 1, metric 0, candidate default path Routing Descriptor Blocks: Y.Y.Y.Y, permanent Route metric is 0, traffic share count is 1 * X.X....
Garry:I agree with Scott, just remember if the IP assigned to your fa0/0 is a public IP you might need to also configure nat in your router. interface0/0ip nat outsideinterface 0/1ip nat insideip nat inside source list 100 interface Fa 0/0 overloadip...
