About Hamza_MX

Hamza_MX · 10-05-2023

Hello, We have a line card A9K-MOD400-TR which was inserted in a chassis 9910 and worked in version 7.1.3 (64bit) , we want to remove this card to another chassis with RSP880 in 32 bit version 6.1.4 . Due to some other second generation card in the s...

Hamza_MX · 09-05-2023

Hello , I want to upgrade my ASR9010 which is running in 6.1.4 / 32bit version to support the new 5th generation Card A9K-4HG-FLEX-TR , Do we need an upgrade path or is it possible to upgrade directly ?

Hamza_MX · 04-19-2022

Hello We have an ASR9K that loose comitted configuration after a reboot .We have the following log : RP/0/RSP0/CPU0:Apr 19 14:45:31.690 : cfgmgr-rp[167]: %MGBL-CONFIG-6-STARTUP_ALTERNATE : Configuration Manager can not find any configuration to apply...

Hamza_MX · 04-15-2022

Hello , I want to pass Layer 2 connection acroos an ASR9K but it is not working . Find below architecture and config :---- ---------------csr---------------interface GigabitEthernet1no ip addressnegotiation auto!interface GigabitEth...

Hamza_MX · 03-15-2022

Hello ,We have an IPV6 tunnel which is configured between 2 Cisco router 1900 with the configuration below : interface Tunnel1no ip addressipv6 address 2001:DB8:20:200:1::2/64tunnel source GigabitEthernet0/1tunnel mode ipv6iptunnel destination 192.16...

Hamza_MX · 04-20-2022

Hello , Thank @tkarnani for you help . I unset the ROMMON config file and all is good now.

Hamza_MX · 04-18-2022

Hello , It worked with the configuration below : l2vpnxconnect group FOp2p FO1interface GigabitEthernet0/0/0/0.20interface GigabitEthernet0/0/0/1.20!

Hamza_MX · 04-15-2022

Hi @Harold Ritter , Sorry for the delay ,we are not more able to continue with the test because the ASR where put in prod environement. Like i said before : I tested the configuration on my virtual lab using XRV and IOS and worked properly Thank yo...

Hamza_MX · 03-17-2022

Hi @Harold Ritter On my virtual lab it worked also properly . > Are the C1900 and asr9k directly connected or is there any other devices in between? Yes they are directly connected. Source & Destination Tunnel are routed loopback which are pingable...

Hamza_MX · 03-17-2022

Hello The tunnel source is an ipv4 routed interface @Georg Pauwen I tested the configuration on my virtual lab using XRV and IOS and worked properly like you said @Harold Ritter May be the problem is related to the ASR9K , but show cef ipv6 2001:db...

Member Since	‎10-19-2017 02:11 PM
Date Last Visited	‎10-08-2024 03:58 AM
Posts	16
Total Helpful Votes Received	5

User Statistics

User Activity

Downgrading A9K-MOD400-TR

IOS XR Upgrade to 64 bit

ASR9K Lost configuration after reboot

ASR9K Layer2

IPV6 tunnel between IOS and IOSXR

Re: ASR9K Lost configuration after reboot

Re: ASR9K Layer2

Re: IPV6 tunnel between IOS and IOSXR

Re: IPV6 tunnel between IOS and IOSXR

Re: IPV6 tunnel between IOS and IOSXR