Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
CAT 6513 IOS ver.12.2(18)SXF4 FWSM ver. 3.1(1)Firewall module in slot 5 of 6513.Firewall is setup for multiple context mode.I have the following config on the switch:firewall multiple-vlan-interfacesfirewall module 5 vlan-group 1firewall vlan-group 1...
I have the following config setup:Cisco 2620 running IOS 12.2(3) Cisco 3640 running IOS 12.2(28)The 2620 is connected to the 3640 via a T1 crossover cable. The 2620 has a WIC-1DSU-T1 module and the 3640 is using 1FE-CT1-CSU network module. I have con...
I'm Using Cisco ACS and Windows 2K Domain to authenticate Windows XP users connecting to a 1200AP with two SSIDs. I can get PEAP to authenticate only when using the Cisco PEAP supplicant installed (the Microsoft provided supplicant just does not work...
I know I've seen this somewhere in the forums before, so forgive my redundant posting. While I'm fairly familiar with ACLs, I'm wondering if filtering at the AP will provide the same benefit. What I'm interested in doing seems to be fairly common:I h...
Maybe I'm overlooking some basic documentation, but I cant' seem to find the command I'm looking fo anywhere.Our setup is CAT 6509 w/ a SUPIIG running IOS 12.1 on the Route module. The switching portion is using CAT OS 7.5 . What I want to do is make...
Paigu,Thank you for clearing that up. Based on what you said, I am doing everything correctly now. However, I still get an error when the 3005 tries to contact the ACS server which is:Authentication Error: No response from serverI know that the VPN c...
