Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Reposted this since I've not got any response over at career certifications.I have been thinking about working in this capacity and people who I have spoken with seem to think Cisco are a good employer. Cisco UK also have some vacancies at the mo...
Hi Guys,With so many policers in use in the scavenger class model, does this impact on the switches CPU? For example, if I configure my access layer 6500 system with 500 users to have a policer on every ingress interface, that will be a lot of polic...
Hi, These are relatively simple questions but can someone conform for me please?1. VTP is carried in vlan 1. CDP in vlan 1. Show VTP status says "lowest updater vlan ID....." Does this mean these protocols will be carried in the lowest number vlan...
Guys,I have got a large campus collpased backbone with two core 6509 systems connected to 30 stacks of 3750's.Each stack of 3750's has 8 vlans. This leads to a large number of vlans on the core 6500s and as such a lot of spanning tree instances. Am...
Guys, I have two 2811 VPN routers connected via several switches. Static crypto maps and isakmp keepalives at 10seconds. Tunnel is up and working, encrypting traffc between loopbacks on the 2811s when I do extended pings. Everything works fine. I do ...
Yes. If I were you I'd run with the 4510R. You'd be crazy not to frankly. Chassis price differences are minimal - the expense is in the cards and PSU's. If you can only afford a single supervisor in each chassis then perhaps get it agreed by your...
....and if I did that it could get back to my employer (who is not the employer in my title). I know of people who say they like it at Cisco but I can't pester them.Hence me asking rather more anonymously in this online community....
Your plan is basically sound. However, the upgrade to the 4510R chassis is not that much more than the 4506. Its like your sending £101 instead of £99 - there wouldn't be that much in it. You coud then split your line cards across the two chassis...
Hi Francois,I have set this up and it works in teh lab with MST. However, it just seems an unecessary complication with 120 vlans. I am using Sup720-3B so these should be more than capable of those vlans. I might just stick with rapdi-pvst+ and kee...
