Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hican you please advise on what the MAC address learning times are for the Cat6500 with Sup720 and for the Cat4500 with Sup5 I am looking for this info in docs but i cannto find itthanksPete
Hii am trying to recover a Cat2950G following a corrupted s/w download. When the switch boots it goes straight to ROM monitor mode. Even though i managed to upload to flash a new image correctly using xmodem, when i instruct the switch to boot from ...
Hi I am trying to configure a Cat6500 with 48 x Gig ports all using WS-6500 modules with on board DFCs (hence native IOS). I want to configure 10 x VLANS and 10 corresponding router interfaces, however, each VLAN will correspond to a single L2 Etherc...
Hia couple of questions:1. Can i load the latest IOS on a SE2 that does not have the 256M upgrade if i dont need large number of routes/addresses etc. ?2. If i want to upgrade a Cat6500 from hybrid to native IOS what do i need to do ?tiaP
I am referring to the number of MACs it can learn per second. for example lets say it sees 1000 MACs every second can it learn them at wire speed or does it flood them ? This is particularly important if a someone sends a MAC flooding attack and the ...
I know SMLT does not support STP within the SMLT group. XRN however, does support STP and RSTP so you can connect to it. The implementation that they require here though is for point to multipoint trunking. You can do it with both vendors implementat...
Only Link Agg across multiple modules. I believe Nortel can do across switches with SMLT. I have tested Cisco switches with 3Com XRN (DLA) and they work fine using manual trunks. PG
The dir flash: command shows all the files including the old corrupted bin file and the new bin file i downloaded correctly using xmodem. When i try to delete the corrupted image it tell me that i dont have the permission to do this. I get the same m...
