Hello,Kindly let me know if anybody have experience with HWIC-2CE1T1-PRI and HWIC-4T1/E1 interconnect end to end. it's possible to work or not. And what additional command required in order to used HWIC-2CE1T1-PRI full 32 channels.
I hv Avaya P882 as core,Cisco cat4507 as distribution and cat3750 access. There are a video in Avaya P882 configure multicast. PC attach to Avaya can receive video stream but PC at Cisco cat4507 and cat3750 cannot receive video stream from avaya P882...
i need help on establish x25 communication between inter-vlan into x25 host.(X25 Cloud)--router--Vlan2--Host1--Vlan3--Host2When configure cmns enable at int ethernet (router), host1 is working fine but Host2 is not working..Pls help me on configuring...
Anybody can suggest me what equipment and software required to built up voice lab for SIP,MGCP,H323,SCCP from end-to-end plus with billing system and TCL .
What router would do you recommend if a customer has 20 autoteller machine (ATMs) connected to each of its regional office and the regional office has a serial connection back to the ISP nearest nodes? Also, if the customer Data Center is supporting ...
according Q&A the Cisco catalyst 2960 -X and -S, the SFP+ can support both speed 10Gbps and 1Gbps but not lowerhttp://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/qa_c67-728348.html#_Toc393235529Q. Can the 10 ...
In my case, one of my AS5400 have 8E1 divided into 2 and connected to 2 difference PRI switch with 2 RLM group. One site (4E1) always shown MATE_UNAVAILABLE but another 4E1 working fine. Any idea ?
512MB for sup-720, how about cisco 3800?. Because i Need to check with you whether cisco 3825 (with memory 256M) can support full routes BGP(currently there are about 180000++ routes).