Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an issue where there are 2 site in Japan do no connect to TACACS. We're running TACACS on the ISE deployment. We're pointing the two isr4k's to the PSN nodes at the HQ. We do a packet capture, at HQ headend device, and see the back and forth ...
I saw that there was a verified solution to DMVPN Tunnel stuck at NHRP state.My issue is very similar to this but I have a static IP address at the spoke. So my address wouldn't change. So what I have is a spoke that can form a tunnel to the secondar...
Hello,I'm having similar issues to some of the post I read on here about PPP and ADSL. However my issue isn't fixed by any of the resolution I see. The following is my output log from debug ppp488578: Sep 5 19:22:47.408: %DIALER-6-BIND: Interface Vi2...
The following are the configs for a flexVPN hub/spoke connections. I keep receiving the following error on the spokeMain-Store#*Apr 4 20:32:47.513: %FLEXVPN-6-FLEXVPN_CONNECTION_DOWN: FlexVPN(FLEX_HUBS) Client_public_addr = 172.16.2.2 Server_public_a...
The security scanner is reporting an older version of OpenSSL in use on ACI version 5.2(8h). Is there a software release that addresses this issue? Path : /lib/libcrypto.so.1.0.0Installed version : 1.0.2kSecurity End of Life : January 1, 2020Time sin...
M02@rt37 The MTU and MRU settings are correct. We troubleshot with the service provider and it seems that their ONT device is not set to bridge mode. So our device and the ONT device have the same IP. We believe that's where the termreq come in when ...
In a DMVPN network i have several static routes. I've redistributed those routes into EIGRP. However I noticed there are several static routes that point to public IP address. How do I redistribute the static routes but leave out the static routes po...
