Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Some cisco documents says cisco 7906 can work with CCM 4.1(2)sr1. but in 7906 data sheet, CCM 4.1(2)sr1 is not mentioned.i am trying to deploy 7906 with CCM 4.1(2)sr1 but not working. can any body help me regarding this.
Having problem to route calls form sip server to E1 port of AS5350. can anybody help me with come sample configuration for AS5350 with SIP Server Peer.Thanks
we have a configured ppp multilink interfaces between pairs of Cisco 7609 and Cisco 3640a routers and put 15 E1 lines in each of them. Now the problem is whenever any one of the E1 line generates CRC errors it generates delays on the multilink hence ...
In my network I have a PIX-520 with 2 interfaces ( i,e inside and outside ) I am using real ip's on the inside means using them without NAT. I want my traffic generated from Inside should go to internet via router placed on the outside interface of P...
In my network I have a PIX-520 with 2 interfaces ( i,e inside and outside ) I am using real ip's on the inside means using them without NAT.I want my traffic generated from Inside should go to internet via router placed on the outside interface of PI...
Dear i am configuring a voip dial-peer (incoming form sip server)dial-peer voice 200 voipincoming dialed-number .Tsession protocol sipv3service sessionand one pots dial-peer (outgoing to E1 port)dial-peer voice 300 potsdestination pattern .Tport 3/7:...
Thanks for the reply Matt,What if I have more than one network e,g 192.168.0.0 /24, 204.16.30.0 /24 etc which i want to use without NAT.can i use nat (inside) 0 0.0.0.0 0.0.0.0Static (inside,outside) 0.0.0.0 0.0.0.0so that only with this command all ...
