Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have two ISR 891g. I am trying to make ipsec tunnel between these two routers. The problem is that both routers does not have static Public IP. Both routers are having LTE sim.
so is it possible or not?
if not possible then what is the solution...
Hi,
we are having tunnel from cisco lte router to asr at HO router. we have configured static Public IP at spoke router which is hosted by HUB router. the HUB is having route to this ip through tunnel and spoke is sending all the traffic to the hub....
I have cisco router as Hub which is connected to ISP with static IP and bandwidth is 60Mbps up/down.
the Spoke (Dynamic Public IP) is connected to local DSL/Cellular with speed not less then 20mbps/up/down.
When I use the internet at the spoke side u...
Hi all,
we have one router connected to two ISP.
we have one /22 subnet.
To ISP 1 , we have advertised /23 (POOL A) and summarized /22
To ISP 2 , we have advertised remaining /23 ( POOL B) and summarized /22.
this helps us achieve the failover in ca...
Hi all,we have our remote office. The router is having IPsec tunnel to our main head office. All the traffic from the remote office is forwarded through the tunnel to head office router. The head office router is getting internet services from ISP Ou...
@MHM Cisco World Thanks for the reply.
i found out that the ddns was not be resolved from anywhere else. Can u help me in configuring the cisco router to be as ddns?
thanks
@Rob Ingram Thanks for the reply
i have checked and tested that method earlier. first they don't have any crypto map defined in their configs.
for my router the router is unable to fetch the ddns ip.
kindly if you can suggest some other working solut...
This is internet Port 80 and port 443 . whenever we check ports 80 and 443 on port checker website for our IP hosted by hub through tunnel, it shows it is blocked.