Hi all , I am a little confused about the specs. The AS5350 will allow 210 concurrent calls - but there is a max of 108 DSP´s. In what situations would a call not use the DSP´s ? Would an IP to IP call use a DSP ?

Hi all , I run an AS5350 gateway which is connected to our pstn switch . A customer of ours has 2 call manager´s , we provide the PSTN connection. The customer is working on connecting 3rd party H323 CPE (allied telesyn) with his CCM net. If we call...

Hi allWe are a service provider with AS5350 GW. Our customer has cisco call managers and wishes to use our AS5350 as gateway to the PSTN. He wishes to use MGCP. It´s not entirely clear whether it can be done or not - I mean , both support MGCP , but ...

I have an AS5350 and am using 827-4V endpoints. The endpoints have their 4 FXS ports connected to analogue CO cards in small PBX´s. Port 1 has the company main number , ports 2 , 3 and 4 have other numbers. The problem is that if a call to the main...

Hi all , We can send faxes from the 827-4V endpoints out to remote PSTN connected fax , but we cannot receive at the 827-4V´s -- handshaking occurs between faxes but the call always drops and no fax data gets through. I have run "debug vtsp sessi...