Is there any way to solve this ?

[jbichard]

I have an AS5350 and am using 827-4V endpoints. The endpoints have their 4 FXS ports connected to analogue CO cards in small PBX´s. Port 1 has the company main number , ports 2 , 3 and 4 have other numbers.

The problem is that if a call to the main number is answered , another call to the main number is not possible - dialler gets busy tone . Is there ANY way to enable further calls to thye main number appear at (the) other ports ? Anything I can do with the dial peers ?

I guess what is needed is some kind of call processing --- call fwd on busy to port 2 etc , or a ring group of ports 1,2,3 etc.

Any advice is greatly appreciated ..

Thanks

Jerry

[jcmartin]

What if you set up identical dial-peers to the other ports with higher preferences (preference 0 is first choice and is default)?

[jbichard]

Great , that seems to make sense ,

Thanks for the reply jcmartin , i will try this out and post the results ,

[jbichard]

It works just fine - thanks jcmartin , you made my day.

One other thing I learned - if you dont do the "no gateway" command on the 827-4V before changing the config - it will crash and reload clean !! .

Have a good weekend.

[icabrera]

Hi jbichard, what IOS do you have at your router?

I have the same crash problem with the 12.2(1)XD3.

Thanks

Isabel