Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have been tasked with setting up our first PPPoE DSL connection. We have it up and running, but the speeds seem to be rather slow, and would like someone to review the config and see if I am missing something that would improve the overall speed o...
I have been tasked with setting up our first PPPoE DSL connection. We have it up and running, but the speeds seem to be rather slow, and would like someone to review the config and see if I am missing something that would improve the overall speed o...
I recently attempted to upgrade software on a nme-16es-1g module within a 3825 router. Unfortunately, the software that was provided apparently was incorrect. So now the module itself it constantly rebooting. Can someone tell me, or point me to, h...
Running 7206vxr hardware, currently running NSE-1 with 12.3 software, soon moving to G1 card with latest software.Is there a maximum number of sub-interfaces that can be configured on an ATM interface? Currently running over 500 sub interfaces. Uti...
I have a 7206VXR [ver 12.3(6b)], that is used as a DSL concentrator at an ISP. Interfaces are defined as:interface ATM2/0.420 point-to-point pvc 0/919 encapsulation aal5mux ppp Virtual-Template2!interface ATM2/0.421 point-to-point pvc 0/920 enca...
On an additional note, if we plug a laptop into a directly connected port on the 7206 that are both configured for PPPoE, the speeds are slowed down as well.Thoughts....
The current setup is:DSL Modem|PPPoA|Occam|PPPoE|Cisco 7206We currently have a couple of old pieces of equipment that the DSL modems currently run through via PPPoA and work fine. But we are now moving to the Occam for more functionality and we wer...
Problem solved!!!!Don't you just love Telcos.........They stated that the interfaces were all defined the same... T-1s,ESF,B8ZS.Of the four interfaces, I had three different combinations of the Above. 64kb vs 56 kb, ESF vs SF, and B8ZS vs AMI. And...
I will find out tonight after hours, but I believe that I tried the speed 64, but it would never show up. It is either default, or this could be the issue. I will test various attempts to get it to work.I am open to other items to test as well.
Thanks for that information. We haven't ordered anything as of yet, but we are leaning towards either the 3825 or 3845. Short term it will be strickly data. Long term will probably include some VoIP connections.
