Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a Cisco Room Kit codec, and we would like Speaker Mode to be selected as the default camera mode without requiring any manual intervention.Currently, Dynamic Mode is automatically selected by default under the Camera Control options on the To...
We are installing a Cisco Room Bar (not Room Bar Pro) with one Cisco Table Microphone Pro (CS-MIC-ARRAY-T) Ethernet microphone.The Room Bar Ethernet port and the CS-MIC-ARRAY-T Ethernet microphone are both connected to PoE switch ports and are confi...
We are experiencing an issue with our Cisco Call Manager and Cisco Unity connection (14.0.1) setup.The Helpdesk extension is configured as a Hunt Pilot and is forwarded to voicemail when unanswered. The voicemail box is configured to send a notificat...
When we receive external calls, we are sometimes unable to transfer them to internal extensions. This issue occurs intermittently and is more noticeable during the evening hours -When operator calls forwarded to reception hunt group(4811,4812,4813).E...
We have a Cisco Room Bar Pro that is currently registered to Webex. Since Webex meetings are rarely used and most of our meetings are conducted through Microsoft Teams, we would like to register the device with Microsoft Teams. We have already create...
even from gui we are again coming back to command. my question is that client want this action to select from codec web gui? is there an option available like that without entering the command.
Thank you for the response. However, the answer is not clear regarding our requirement.We are trying to configure this from the codec's web GUI, not from the Touch Panel. There is no option on the Touch Panel to change the default camera mode.Our que...
thanks. from GUI cant we do this? customer is asking about this from GUI. because is not much familiar with command section. From GUI which section we can do this setup?
So are you telling Tablet , ethernet microphone and the room bar ethernet port for tablet should be connected to same vlan and it should not reach to a dhcp server. Is this what you are mentioning here? if so, then this way i already explained to the...
