Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all
Even the ERSPAN monitoring shows it is up it does not work with cisco Nexus 5672UP - version 7.0(8)N1(1). No traffic is send through.
Configuration is correct until the fact that in ERSPAN Destination the default VRF cannot be set (in ...
Dear All
Regarding to the CVD -Deploying IWAN Public Key Infrastructure - the Root CA as a dedicated router:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Sep2017/CVD-IWANPKI-Deployment-SEP17.pdf
If you need the certificate based authenti...
Dear All
We have a customer that is running in a issue with retrieving Groups from AD with Internet Explorer 11 with ISE 2.3.0.98 - Patch 2.
Even disabling TLS 1.0 and SSL 3.0 while enable TLS 1.1 and TLS 1.2 is not working. https://www.cisco.com/c...
Dear all
We have a use case where a customer just want to deploy QoS on a Layer 2 WAN (1 Gbit/s) connection. My approach is to mark the traffic by Access Lists (just example below).
DC 1 - Switch A ---PE--- Layer 2 WAN ---PE--- DC 2 - Switch B
...
Dear All
I have a small Mobility Express deployment:
- 1 x 2800i - MoE WLC Primary
- 1 x 2700i - CAPWAP
- Software Version: 8.5.105.0 (Existing MoE AP and new MoE AP)
Now I want to add a second Mobility Express AP (2800i) as a MoW WLC Secondary and I...
Dear mojafri
Thanks for the information that ERSPAN-dest is by default in "default vrf". Anyway the monitoring is up but no traffic is not coming through.Best Regards
HiI decided to change the approach from just applying QoS on the L2 connection to End-To-End-QoS.
Server A - 10.20.0.100/24
|
A-4500-X------------Layer-2-------------B-4500-X-----Server B - 10.10.0.100/24
|
3850 (Access Switch) |
Client 10.0.0...
