Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
users can authenticate by RADIUS but when certificates used VPN can be established only if authentication method set to none. if it set to RADIUS, concentrator (3020) terminates the session. The log message on Concentrator is below:24088 10/28/2005 1...
I can telnet the PIX (501), PDM version 3.0(1) is installed, http server is enabled, PDM is configured and the host is allowed, still I can't access the PDM. Web browser displays the message "the page can not be displayed"?any help will be appreciate...
I configured VPN 3020 using CA. Works fine untill authentication set to none under IPSec tab. When autehntication method set to Internal/RADIUS, VPN users no longer be able to connect, even they are not prompted for username password. If anyone could...
yes, I type https. Ican access one other PIX in our network. only difference is that we have a concentrator in between lan and PIX (which PDM is not accessible). I can telnet to it but the only problem is with PDM. what about 3020 concentrator, would...
I am trying for similer config, but it doesn't work. If authentication is set to none, it works, if set to RADIUS or Internal, it stops working. I am using VPN client version 4.6.03 and 3020. Log messages from Concentrator when RADIUS is defined for ...
Belwo are the Log messages when RADIUS is configured for user authentication:8766 09/19/2005 09:43:29.070 SEV=8 IKEDBG/79 RPT=21260 Mismatched attr types for class DH Group: Rcv'd: Oakley Group 2 Cfg'd: Oakley Group 58768 09/19/2005 09:43:29....
you can limit the data rate on serial interfaces with back to back connection using clock rate. How much clock rate you issue means the bandwidth you are allowing on that link.
