About Yachay

Yachay · 11-30-2017

Hi! I need your help in order to know if the design which I am attaching will work or I will have some problems with that. Thanks!

Yachay · 07-16-2018

I think you need to be more specific about what exactly a network problem is.

Yachay · 03-12-2018

Which SFP module and switch are you using?

Yachay · 03-02-2018

Remember, R2 belongs to the ISP, so I think to add a default route pointing out to R1 is not a good idea...

Yachay · 03-02-2018

R2 needs to have routes back your networks (which should be static routes.)

Yachay · 03-02-2018

I recommend you to use trunk mode instead of access mode on the ports between the router and the 5Ks. Also, always start with the 'switchport' command in order to be 100% sure that the port will work on layer 2.

Member Since	‎11-30-2017 09:14 AM
Date Last Visited	‎07-18-2018 12:03 AM
Posts	79
Total Helpful Votes Received	25

User Statistics

User Activity

OSPF area design

Re: Nexus 5596UP cause network problem on Oracle RAC interconnect link

Re: SFP module comparison between network devices

Re: Can't Ping From local network to Router(ISP)

Re: Can't Ping From local network to Router(ISP)

Re: vpc etherchannel fails