Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have some LNSs running 12.4 SP Services, running with the following config (qos specific lines and currently not working):!class-map match-all voice-signaling match access-group 101class-map match-all voice-traffic match access-group 102!!policy-m...
I am unable to get service-policy working on a dialer interface, config below:class-map match-all voice_ccoip match access-group name CLASS_1!!policy-map voice_ccoip class voice_ccoip priority 128 class class-default fair-queuepolicy-map shape clas...
HiI am getting the following errors when devices try to authenticate, we are using WPA-PSK TKIP and the keys definitley do match, funnily though, the devices are able to ping the gateway:*Mar 1 03:21:49.628: DOT11 EVENT:(adding)client->key_details.e...
We are deploying CCM 5.1 with ISDN PRI Q931 ports on a 3825 router, using H323 between CCM and Gateway.Outbound calls all work fine, however, inbound do not work. They are reaching CCM as a simple change the to DN generates a number not assigned erro...
I need to how to configure "external phone number mask" on a DN configuration but still have actual phone DN displayed on the 7912 (DN 1001-1004 per site). I do not want to have route patterns as I would need 2-3 per site (500+ sites).I basically nee...
Thanks for your responseI have tried entering it on to atm0/0/0, atm0/0/0.38 and on to the PVC. I get the same GTS: Not supported on this interface on 0/0/0 & 0/0/0.38, I tried it on the PVC 0/38, it goes in but does not appear in the config. I have ...
No, we had to roll out with the number on the handset, we ended up with the off-net number and the internal extension in the line text label on every handset. I did not spend much time on the issue as the team we ready to roll out so if you do find a...
This is an issue with the number not actually appearing on the handset. This actually works on our but the display number on the handset I want as the DN for on site transfers only we have t following:Partition - Site1_internal - DN 1001, 1002, 1003T...
