cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2407
Views
0
Helpful
1
Replies

TKIP_REPLAY error

warren.miller
Community Member

Hi

I am getting the following errors when devices try to authenticate, we are using WPA-PSK TKIP and the keys definitley do match, funnily though, the devices are able to ping the gateway:

*Mar 1 03:21:49.628: DOT11 EVENT:(adding)client->key_details.encrypt_type is 20

*Mar 1 03:21:49.628: dot11_aaa_auth_request: Received dot11_aaa_auth_request for client 0002.7266.c731

*Mar 1 03:21:49.628: dot11_aaa_auth_request: SSID: XXXXX_XXXXX, Mac Address: 0002.7266.c731, auth_algorithm 0

*Mar 1 03:21:49.628: dot11_aaa_add_dot11_client_entry: AAA Client entry (0002.7266.c731, F8A74C) is added to the client list

*Mar 1 03:21:49.708: DOT11 EVENT:Freeing packets with previous MIC

*Mar 1 03:21:49.715: dot11_aaa_send_response: wlccp_ap_auth_method_done 50, method_done 8

*Mar 1 03:21:49.715: dot11_aaa_send_response: Sending response: 2 for: 0002.7266.c731

*Mar 1 03:21:49.715: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0002.7266.c731 Associated KEY_MGMT[WPA PSK]

*Mar 1 03:21:49.715: dot11_aaa_client_associate: Associated 0002.7266.c731

*Mar 1 03:21:57.921: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x7) received from 0002.7266.c731.

*Mar 1 03:21:58.202: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x8) received from 0002.7266.c731.

*Mar 1 03:21:58.206: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x8) received from 0002.7266.c731.

*Mar 1 03:21:58.921: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x9) received from 0002.7266.c731.

*Mar 1 03:21:58.952: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x9) received from 0002.7266.c731.

*Mar 1 03:21:58.960: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x9) received from 0002.7266.c731.

*Mar 1 03:22:04.201: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0xB) received from 0002.7266.c731.

*Mar 1 03:22:04.779: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0xD) received from 0002.7266.c731.

*Mar 1 03:22:06.862: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0xF) received from 0002.7266.c731.

*Mar 1 03:22:07.640: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x10) received from 0002.7266.c731.

*Mar 1 03:22:08.357: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x11) received from 0002.7266.c731.

*Mar 1 03:22:11.354: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x15) received from 0002.7266.c731.

*Mar 1 03:22:13.611: %DOT11-4-TKIP_REPLAY: TKIP TSC replay was detected on a packet (TSC 0x19) received from 0002.7266.c731.

*Mar 1 03:22:49.740: %DOT11-4-MAXRETRIES: Packet to client 0002.7266.c731 reached max retries, removing the client

*Mar 1 03:22:49.740: Client 0002.7266.c731 failed: reached maximum retries

*Mar 1 03:22:49.740: dot11_aaa_client_disassociate: Received disassociation notice for 0002.7266.c731

*Mar 1 03:22:49.740: dot11_aaa_delete_client_entry: AAA Client (0002.7266.c731, F8A74C) is deleted

*Mar 1 03:22:49.740: dot11_auth_client_abort: Received abort request for client 0002.7266.c731

*Mar 1 03:22:49.741: dot11_auth_client_abort: No client entry to abort: 0002.7266.c731 for application 0x1

*Mar 1 03:22:49.741: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0002.7266.c731 Reason: Previous authentication no longer valid

1 Reply 1

wong34539
Level 11
Level 11

update the client card to the latest driver. Replace the Windows driver with the official Belkin and then check the logs again.

The link for the Belkin card:

http://web.belkin.com/support/download/download.asp?download=F5D7050〈=1&mode

Review Cisco Networking for a $25 gift card