Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to configure limited access right for a specific user and the following config defines a local usernane BACKUP that can only ping. However, how can the user BACKUP telnet to vty 5.-----------------------------------------------enable secret le...
I need to test our firewall for vulnerability from the internet. Can anyone recommend a simple and efficient test tool for this purpose (portscan etc.)thanksSimon
I configured, ntp server 131.188.3.220 source outside - but the PIX does sync to the server. I used the same command on a PIX 520 with no problem. Anything special about PIX-501?
Andy,I did test again. When the client is traversing a NAT router the command `isakmp nat-traversal' works as expected i.e esp gets encapsulated in UDP using port 4500.To me this was new - I found an explanation on how the peers detect that a NAT rou...
AndyRight, this seems to be the command to use. However, I tried it without success, i.e the client still connects to the pix with transparent tunnel inactive ("enable transparent tunnel" checked at the client).I'm using client ver. 3.6.6(A). Also, I...
