Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We have a bare metal ISE Server on premises. We have migrated many of our services over Azure cloud and since there is only one ISE node, we want to have a cluster with a node in the cloud. Is it possible and what are the limitations for this ...
Hello, Sorry but can't seem to find a good title for my question, you may help me with that. I have, as posted in the image:In my backbone, I have a PE that is connected to a switch (Switch 2). This switch has many clients connected to it and is perf...
Hello,
I have a switch cisco ME3400:
Switch Ports Model SW Version SW Image ------ --- ---------------- ---------- ---------- * 1 26 ME-3400E-24TS-M 12.2(60)EZ11 ME340x-METROBASEK9-M...
Hello,
Can we NA multiple LANs on the same router going out the same interface and having the same IP addresses?
For example:
For the case in the design below, how can we do it without using VRFs?
Thanks,
Hello,
I came through an odd issue. We have an ISR 4331 which is providing Internet Access. Ge0/0 is connected to the LAN and Ge0/1 is connected to the WAN. (check design attached)
After testing the Internet connection reliability with IPERF3, pa...
Thank you for your response,
However, since the points to consider are not a priority for this deployment, is it possible to have an ISE cluster between a bare metal and Azure VM.
Thanks
This is the config I tried: interface GigabitEthernet2description ### Link to Switch ###no ip addressnegotiation autodot1q tunneling ethertype 0x9100no mop enabledno mop sysidservice instance 228 ethernetencapsulation dot1ad 228 dot1q 200bridge-domai...
