I have a 2503 and have went through four different versions of IOS (currently on 12.2(32)) trying to find one that would allow me to do encapsulation dot1q on a sub-interface. Is this possible on a 2500?Thanks,Jesse
Does anyone know if there is a, or plans for a, Cisco Press Video / IPVC / MCU book? I think its a big enough portion of the AVVID solution that a book is well overdue and needed.Thanks,Jesse
I have recently added a failover Unity server and it seems to be working as expected. I know you cant perform upgrades while in failover mode but can I go into failover mode, then on my primary server delete my CallManager integration and then recre...
Im trying to dial my IPVC IVR from a IP phone. I have set up H.225 trunk in CCM and a route pattern to point to that trunk. I created a static e.164 address on the gatekeeper to point to the IVR. When I dial the IVR from a phone IVR Application sh...
We have a CallManager cluster with 1000 phones on a military installation spread across a large campus. When 911 calls are placed the info the PSAP gets is from our main number, not the individual user. Im trying to find some regulations, FCC or DoD...
When you select the bothways option on a FXO port you are allowing inbound calls on that port. All inbound calls on that port need to be routed somewhere, they are sent to Attendant Directory Number that you specify. Jesse
Here is the info while telneted into the GW card. I'm not sure what the "Mandatory information element missing" is?Thanks,Jesse1964999|USER INFO|#|INFO| #########################################################################################1...
Im trying to dial my IPVC IVR from a IP phone. I have set up H.225 trunk in CCM and a route pattern to point to that trunk. I created a static e.164 address on the gatekeeper to point to the IVR. When I dial the IVR from a phone IVR Application sh...