Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a pix520 with OS 4.4(7) with a floppy disk drive.I want to update to OS 6.2(1).In my study book,it says I need three files to do a update:rawrite.exe/bh62.bin/pix621.binAnd it says I need a Activation Key to activate DES and 3DES.But I bought ...
I want to update my pix from 4.4(7) to 6.x.And it requires my pix520 to have at least 16M flash and 32M RAM.But I'm not sure the flash size of my pix520.which command should I use?
I used PAT to deal with all my inside addresses.And the PAT global IP is different from the pix outside interface IP.I enabled ICMP to go through my pix(OS4.4).When I tried to ping PAT global IP from outside network,I failed .I don't know why.Is it r...
I'm newable to pix.After I configured my pix520 like follow,I couldn't be able to ping outside interface IP from inside network successfully.what's the problem?And another small question:If I use PAT to deal with inside network addresses,can I ping t...
I've tried to enable and disable proxy arp on my router interface which is connected to the outside interface of my pix.I couldn't be able to ping PAT global IP seccessfully wether proxy arp is enabled or disabled on my outside router.I cleared arp c...
I saw on http://www.cisco.com/en/US/products/hw/switches/ps628/products_installation_guide_chapter09186a0080150b56.html#1080720 ,when uplink LED blinks between green and amber,it means link is faulty.What does "link is faulty" mean? Physical layer or...
I saw on http://www.cisco.com/en/US/products/hw/switches/ps628/products_installation_guide_chapter09186a0080150b56.html#1080720 ,when uplink LED blinks between green and amber,it means link is faulty.What does "link is faulty" mean? Physical layer or...
