Hello,I'm facing an issue and I really don't know what's happening.I'm working on 2 Cisco routers (Cisco 891 and Cisco C1111-8P). The running-config is identical on both routers.I have a nat as follows. ip nat outside source static tcp 10.10.10.10 12...
Hello everybody,Is there a way to ignore bellow messages from logging buffer/console? I dont want to see them. 2496543: Jan 8 13:13:00.691: %DOT1X-5-FAIL: Authentication failed for client (xxxx.xxxx.xxxx) on Interface Gi1/0/18 AuditSessionID 00000000...
Hello,
I saw, by using a port scan, that the tftp upd port is open.
Is there any threat?
It is possible to turn it off?
Thank You!
PORT STATE SERVICE
69/udp open|filtered tftp
Nmap done: 1 IP address (1 host up) scanned in 0.45 se...
Hello All,
I have two Access Points and I discovered that one of them has the 37540 port open.
1) It is possible to turn if off ? If yes, how?
2) How this affects the AccessPoint clients?
Thank You.
Hello,
I am trying to change the key for SSH from 1024 to 2048 but I have (so far) no solution for that.
Unfortunately, ip ssh rsa keypair-name SSH and crypto key generate rsa general-keys modulus 2048 label SSH don't work.
I trying also other ...
Thank for your reply,
I have no tftp-server lines in my configuration.
NR01#show running-config | i tftp
NR01#show running-config | i ftp
NR01#
Even so, the port seems to be open.
Any clues why and how can I turn the service off since I do ...
Hello,
Unfortunately, I have no such line on the config line for this interface.
I do have " station-role root" but the same line is present on the other AP where the port is closed.
Any other suggestions please?
Thank You!
Hello,
Thank You Rasika but...
The AP is already in autonomous mode, so...no WLC, no controller no nothing. Just the AP itself.
What is wrong in this case for such behavior?
There is "no" no command to close this port?
Thank You.
Hello and thanks for your reply.
Yes, I generated the key first.
There is no possibly to assign the key (labeled) to the SSH.
PTNS03(config)#ip ssh ?
authentication-retries Specify number of authentication retries
dscp I...
